Hi Joe, Yes that was the reason for why i installed latest uhd from source. Thank you, I will search in this direction!
I' m using Gnu radio Companion 3.7.11 Le sam. 9 mars 2019 à 20:35, Joe Martin <[email protected]> a écrit : > Hi Thomas, > > I also am new to USRP so if I tell you something that is not correct > perhaps someone more knowledgeable will weigh in and correct me for both > our benefits. > > The error you received indicates (I think) that the FPGA firmware version > and the UHD version you have installed are incompatible. I obtained this > same type of error when first bringing up my x310. To cure it, I had to > find a pair of versions of firmware and software that are compatible. In > my case I found that X300 firmware version 36.0 works with UHD version > 3.14.0 so that’s what I am currently using. > > It wasn’t clear to me (and still isn’t) how one determines which firmware > and software versions are compatible. If there is a way to do that I’ll be > interested in learning about how to do it. I simply used a trial and error > method until I found a pair that worked together. Basically, I installed > the latest UHD version of software and found that X300 XG FPGA v36.0 > firmware worked with it on my USRP. > > Good luck, I know it can be frustrating when you don’t know all that you > need to know to make things work smoothly, but things do get better in > terms of your understanding if you hammer on the issues long enough. > > Maybe this is enough of a hint to allow you to make progress on it for > your USRP? > > Joe > > On Mar 9, 2019, at 12:00 PM, Thomas Lavarenne via USRP-users < > [email protected]> wrote: > > Yes, it worked, but the script were on /usr/lib/uhd/utils/ and same > error... > > sudo /usr/lib/uhd/utils/uhd_images_downloader.py > [sudo] Mot de passe de user : > [INFO] Images destination: /usr/share/uhd/images > [INFO] Target usrp1_b100_fw_default is up to date. > [INFO] Target x3xx_x310_fpga_default is up to date. > [INFO] Target usrp2_n210_fpga_default is up to date. > [INFO] Target n230_n230_fpga_default is up to date. > [INFO] Target usrp1_b100_fpga_default is up to date. > [INFO] Target b2xx_b200_fpga_default is up to date. > [INFO] Target usrp2_n200_fpga_default is up to date. > [INFO] Target e3xx_e320_fpga_default is up to date. > [INFO] Target n3xx_n310_fpga_default is up to date. > [INFO] Target b2xx_b205mini_fpga_default is up to date. > [INFO] Target x3xx_x300_fpga_default is up to date. > [INFO] Target octoclock_octoclock_fw_default is up to date. > [INFO] Target usrp2_usrp2_fw_default is up to date. > [INFO] Target usrp2_n200_fw_default is up to date. > [INFO] Target usrp2_usrp2_fpga_default is up to date. > [INFO] Target b2xx_common_fw_default is up to date. > [INFO] Target b2xx_b200mini_fpga_default is up to date. > [INFO] Target usrp1_usrp1_fpga_default is up to date. > [INFO] Target usb_common_windrv_default is up to date. > [INFO] Target usrp2_n210_fw_default is up to date. > [INFO] Target n3xx_n300_fpga_default is up to date. > [INFO] Target e3xx_e310_fpga_default is up to date. > [INFO] Target b2xx_b210_fpga_default is up to date. > > > Le sam. 9 mars 2019 à 19:58, Brian Padalino <[email protected]> a > écrit : > >> On Sat, Mar 9, 2019 at 1:45 PM Thomas Lavarenne via USRP-users < >> [email protected]> wrote: >> >>> Hello, >>> I'm new here and pretty new with usrp. I'm trying to use usrp-2900 with >>> GNU Radio and Ubuntu 18.04, but i have this problem (latest driver uhd from >>> source): >>> >>> ''' >>> linux; GNU C++ version 7.3.0; Boost_106501; UHD_003.010.003.000-0-unknown >>> >>> -- Loading firmware image: /usr/share/uhd/images/usrp_b200_fw.hex... >>> -- Detected Device: B200 >>> -- Loading FPGA image: /usr/share/uhd/images/usrp_b200_fpga.bin... done >>> -- Operating over USB 3. >>> Traceback (most recent call last): >>> File "/home/user/top_block.py", line 166, in <module> >>> main() >>> File "/home/user/top_block.py", line 154, in main >>> tb = top_block_cls() >>> File "/home/user/top_block.py", line 78, in __init__ >>> channels=range(1), >>> File "/usr/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py", line >>> 122, in constructor_interceptor >>> return old_constructor(*args) >>> File "/usr/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py", line >>> 2683, in make >>> return _uhd_swig.usrp_source_make(*args) >>> >>> *RuntimeError: RuntimeError: Expected FPGA compatibility number 14, but >>> got 16:The FPGA build is not compatible with the host code build.* >>> Please run: >>> >>> "/usr/lib/x86_64-linux-gnu/uhd/utils/uhd_images_downloader.py" >>> >>> >>> Done >>> '''' >>> Any ideas accepted! >>> >> >> Have you tried running: >> >> $ sudo /usr/lib/x86_64-linux-gnu/uhd/utils/uhd_images_downloader.py >> >> As the message suggests? >> >> Brian >> > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
