Hello everyone,
I am facing big problem with my USRP X310.
First problem is that some day, a gnuradio flowgraph that was working
fine since almost 1 year suddenly stopped working, and it turned out the
problem was coming from the ettus, because when I tried to do a
uhd_usrp_probe, I had a
UHD Error:
x300 fw communication failure #1
EnvironmentError: IOError: x300 fw poke32 - reply timed out
UHD Error:
x300 fw communication failure #1
EnvironmentError: IOError: x300 fw poke32 - reply timed out
UHD Error:
x300 fw communication failure #1
EnvironmentError: IOError: x300 fw poke32 - reply timed out
UHD Error:
An unexpected exception was caught in a task loop.
The task loop will now exit, things may not work.
EnvironmentError: IOError: x300 fw communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
I then tried to update my version of UHD, which worked well, and then I
had to update the FPGA image. This worked weel too, however after it was
finnished, i did the poser cycle as recomanded, but the USRP never
showed up again on the network. It tried to find it on the 192.168.10.1,
but network was unreachable.
I decided to use the https://kb.ettus.com/X300/X310_Device_Recovery
process to re-upload the fpga image from another computer with a
different version of the UHD library. the full process worked well, but
in the end, when I tried to ping the Ettus, I get an error saying host
is unreachable. The error changed for the ping, but when I run
uhd_find_device, there is no device found.
I do not know what else I can try to recover the device, or could it be
some hardware problem ?
Thanks in advance,
Kind regards,
Nicolas
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
