Hi Jason, It looks like you are missing the package: python-setuptools
Note, you should not use rfnoc-devel, but instead use a newer version of UHD like v3.14.0.0, and then you can enable RFNoC by adding the cmake flag -DENABLE_RFNOC=ON Regards, Nate Temple On Mon, Apr 8, 2019 at 12:34 PM Jason Matusiak via USRP-users < [email protected]> wrote: > I should be getting an e320 in this week, so I started to get my > environment setup. I started off like I do for the e310 and ran the > cross-compile shell script. I then sourced the environment. I cloned uhd > and checked out rfnoc-devel like I usually do. Within uhd, I created a > folder called build_mpm. Within that, I ran: cmake > -DCMAKE_TOOLCHAIN_FILE=../host/cmake/Toolchains/oe-sdk_cross.cmake > -DCMAKE_INSTALL_PREFIX=/usr ../mpm/ > > That seemed to work OK. I then ran mak -j12 and it looks like it is done > and worked, but it actually throws an error at the end: > [ 98%] Linking CXX shared library libpyusrp_periphs.so > [ 98%] Built target pyusrp_periphs > [100%] Generating build/timestamp > Traceback (most recent call last): > File "/opt/gnuradio/e320/src/uhd/build_mpm/python/setup.py", line 11, in > <module> > from setuptools import setup > ImportError: No module named 'setuptools' > make[2]: *** [python/build/timestamp] Error 1 > make[1]: *** [python/CMakeFiles/usrp_mpm.dir/all] Error 2 > make: *** [all] Error 2 > > Is something missing that needs to be built before building UHD? > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
