-20dBM is loud. Try backing the generator down to -40dBm

Sent from my iPhone

> On May 5, 2019, at 12:14 PM, franz kurniawan <[email protected]> 
> wrote:
> 
> I set the generator at -20db and b200 gain at 50..
> I check that there is no cutoff at the usrp output and the input to AM demod 
> block..
> 
> Below are the setting of uhd block in gnuradio
> Samp rate 500k
> Output type float32
> Sync PC clock
> Clock rate 10 Mhz external
> Freq 121MHz
> Gain 50
> Ch0 Bandwidth 200000
> 
> 
> Thank you
> 
>> On May 5, 2019 11:05 PM, "Marcus D Leech" <[email protected]> wrote:
>> What output level for the generator? What gain setting on the b205?
>> 
>> 
>> Sent from my iPhone
>> 
>>> On May 5, 2019, at 11:58 AM, franz kurniawan <[email protected]> 
>>> wrote:
>>> 
>>> So, i try to make AM receiver..
>>> And the resulted demodulated audio was distorted from its original signal..
>>> So, at this experiment i used signal generator to make AM with sine wave 
>>> modulated signal..
>>> I expect to get pure sine wave signal after AM demod process..
>>> However, the sine wave is distorted as attached picture
>>> 
>>> I compared with another brand SDR and can get my expected signal..
>>> So i guess there is some problem with the b210mini
>>> 
>>> Thank you
>>> 
>>> 
>>> 
>>> On May 5, 2019 10:28 PM, "Marcus D. Leech via USRP-users" 
>>> <[email protected]> wrote:
>>>> On 05/05/2019 10:53 AM, franz kurniawan via USRP-users wrote:
>>>> Dear USRP users,
>>>> 
>>>> I used b210mini and encounter I/Q imbalance as below picture..
>>>> As a result, the analog signal demodulation was distorted and result a 
>>>> crappy sound..
>>>> I
>>>> Is there any workaround regarding this issue?
>>>> 
>>>> Thank you
>>>> 
>>>> 
>>> Not sure what you mean.  The I/Q seem to be about 90deg out of phase wrt 
>>> one another, which is exactly what you'd expect.
>>> 
>>> Could you describe what it is you're trying to do?  Something with an audio 
>>> demodulator?
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> USRP-users mailing list
>>> [email protected]
>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>> 
>>> <IMG-20190505-WA0001.jpg>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to