Philip, before building one of your images, does anything need to be done to get ethernet to work? It seems like after using mender to setup a new image and rebooting, I cannot bring up sfp0 to save my life. It won't work until I reboot again, but I think that that drops the mender image reverts to the old one since I didn't commit it. Any steps I am missing?
________________________________ From: Jason Matusiak Sent: Tuesday, May 21, 2019 11:18 AM To: Philip Balister; Ettus Mail List Subject: Re: [USRP-users] GR in the E320 OK, that seems to be building (who knows if it will succeed), thanks. I can't seem to find directions online about how to add in my own recipes, or those written up somewhere? Basically, I am trying to figure out how I can add something like gr-my_blocks to the project (either part of bitbake, or as a stand-alone build I move over to the device afterwards. ________________________________ From: Philip Balister <phi...@balister.org> Sent: Tuesday, May 21, 2019 11:05 AM To: Jason Matusiak; Ettus Mail List Subject: Re: [USRP-users] GR in the E320 Edit bblayers.conf in your conf directory. There is also an add layer command, but I'm old fashioned :) Philip On 05/21/2019 10:50 AM, Jason Matusiak via USRP-users wrote: > Interesting, thanks. They are using sumo, so I will try to check that branch > out and see how it works. > > I will need to research how to add it in and build it as I see pulling it > down and checking out sumo alone isn't enough. > > Thanks for the insights. > > ________________________________ > From: Philip Balister <phi...@balister.org> > Sent: Tuesday, May 21, 2019 10:39 AM > To: Jason Matusiak; Ettus Mail List > Subject: Re: [USRP-users] GR in the E320 > > You need the meta-sdr layer. Choosing a branch may be tricky, only the > older ones have 3.7 support. My recent work in master is all in support > of transitioning to the unreleased 3.8 gnuradio, which is much better > for embedded builds. > > Might also be some pain due to Ettus forking the uhd recipe. > > Philip > > On 05/21/2019 10:30 AM, Jason Matusiak via USRP-users wrote: >> OK, so I am a total newbie when it comes to open-embedded. I know that the >> docker to build doesn't include a gnuradio-image bitbake option (only >> developer-image), so I tried to make one. I created a new gnuradio-image.bb >> file and added gnuradio to the list of things to build. Sadly, I appear to >> need to do more than that as it won't build: >> >> oe-builder@b3d40f15af25:~$ bitbake gnuradio-image --verbose >> Loading cache: 100% >> |##########################################################################################################################################################################################################################| >> Time: 0:00:00 >> Loaded 2964 entries from dependency cache. >> NOTE: Resolving any missing task queue dependencies >> NOTE: selecting opkg-utils-native to satisfy >> virtual/update-alternatives-native due to PREFERRED_PROVIDERS >> NOTE: selecting linux-yocto to satisfy virtual/kernel due to >> PREFERRED_PROVIDERS >> NOTE: selecting pseudo-native to satisfy virtual/fakeroot-native due to >> PREFERRED_PROVIDERS >> NOTE: selecting opkg-native to satisfy opkg-native due to PREFERRED_PROVIDERS >> NOTE: selecting nativesdk-glibc to satisfy runtime nativesdk-glibc due to >> PREFERRED_PROVIDER_virtual/nativesdk-libc = nativesdk-glibc >> ERROR: Nothing RPROVIDES 'gnuradio' (but >> /home/oe-builder/meta-ettus/meta-ettus-core/recipes-core/images/gnuradio-image.bb >> RDEPENDS on or otherwise requires it) >> NOTE: Runtime target 'gnuradio' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['gnuradio'] >> NOTE: Target 'gnuradio-image' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['gnuradio-image', 'gnuradio'] >> ERROR: Required build target 'gnuradio-image' has no buildable providers. >> Missing or unbuildable dependency chain was: ['gnuradio-image', 'gnuradio'] >> >> Summary: There were 2 ERROR messages shown, returning a non-zero exit code. >> >> Anyone know how to do add it (once that works, I'll want to add some of my >> own OOT packages as well)? >> >> >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
