Hi Jason,
I've had luck with the following:- backup/clone the original SDCard
image to disk and/or larger SDCard (using dd or otherwise)- on the new
card, resize/shift the data partion to the end of the card (using
gparted)- resize the two filesystem/kernel partitions to fill in the
empty space in the middle, but they need to be the same size (using
gparted)
Read up on Mender for more info on the partition layout
(https://docs.mender.io/1.7/devices/general-system-requirements#partition-layout).
It's a pain that they went with Mender for the default E320 card; it
cuts the 'usable' file system space in half, at the benefit of having
2 independent filesystem partitions... I haven't had time to fiddle
around and ditch the mender for a 'normal' partition layout, but I'd
assume it's possible.
Cheers,Chris
----- Original Message -----
From: "Jason Matusiak"
To:"Ettus Mail List"
Cc:
Sent:Wed, 19 Jun 2019 16:29:38 +0000
Subject:[USRP-users] E320 with larger SD card
I wanted to use a larger SD card than the one that as supplied, but I
am having issues. I loaded up the card, and then extended the data
partition to use up the rest of the free space (about 100GB). But
then it doesn't boot.
I am wondering if the change to a partition size screwed up something
in a config file somewhere. Is there a way to fix this without
rebuilding a docker image? I am using the UHD 3.14.0.0. that has the
smaller data partition (UHD 3.14.1.0 has a larger data partition, but
doesn't include any GR/python packages, so I need to use the older
image).
Thanks.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
