Hi Mike. Did you try putting the original (not the cloned) SD card in the 2nd unit? Do you still observe the same error? Doing so would eliminate an issue with a corrupted SD card during duplication.
-Robin On Thu, Jul 11, 2019 at 1:35 PM Michael Don via USRP-users < [email protected]> wrote: > I have 2 E312 units. On one I have a gnuradio script that works fine. > I cloned the sd card from the first E312, and put it on the second > E12, and am getting the following error: > > WARN: USRP Source Block caught rx error code: 1 > > Is this some sort of hardware problem, since the 2 systems have > identical software? Anyone know what rx error code: 1 means? Any > suggestions on how to fix this? > > Also, while playing around to try to fix this I'm pretty sure I set > the rx gain to 50 on one of the units, and got the "rx error code: 1" > error, and reduced the gain, and the error went away. On the unit > that is currently failing, I set the gain to 0 and still get the > error. The unit that's working has the gain set to 25. I thought the > max gain of the E312 was 76, not sure what's going on here. > > -Mike > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
