I don’t want to make this about gnuradio, because this isn’t the place. However, why would gnuradio know to link the ab,a,b,ba antennas to tx/rx and rx2?
On Thu, Jul 18, 2019 at 7:14 PM Marcus D Leech <[email protected]> wrote: > There IS no RX2 or TX/RX antenna names on Basic_rx or Basic_tx boards. > > You can see In the probe output what the legit antenna names are for the > boards you have installed. > > Sent from my iPhone > > On Jul 18, 2019, at 6:33 PM, Robin Coxe via USRP-users < > [email protected]> wrote: > > Sorry, I misunderstood your question-- did you set up the mode in UHD > correctly? > http://files.ettus.com/manual/page_dboards.html > > Also, you might want to double-check the SMA connections just in case. > Not sure if the subdev spec has changed in the last year. Someone who > knows the UHD codebase better than I do would have to answer that question. > > > > On Thu, Jul 18, 2019 at 3:26 PM Taylor Eisman via USRP-users < > [email protected]> wrote: > >> Robin, >> >> We've set it up so that the RX Daughterboard connects to RX2 and the TX >> Daughterboard connects to TX/RX. Previously, we've been able to use these >> ports, but now it no longer identifies that we even have these ports. I >> don't think the issue is the Daughterboard as this worked less than a year >> ago. >> >> Thanks, >> >> Taylor >> >> _______________________________________________ >> USRP-users mailing list >> [email protected] >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
