Brian, Sam, Thank you for your replies. Indeed I am using a USB ⇔ RJ45 dongle. Its "USB 3.0" LED blinks but I wasn't sure if I could trust this information or not. If X310 doesn't know what is over the RJ45 connection (which totally makes sense once I think about it ...), then I have no other choice than trusting it.
As for why am I doing this : my workstation has only one network card, its RJ45 port is already used and I cannot get rid of this connection. I am working on OpenAirInterface that interacts with USRP through UHD. Regards, Rodolphe Bertolini Le mer. 24 juil. 2019 à 16:51, Brian Padalino <[email protected]> a écrit : > On Wed, Jul 24, 2019 at 8:11 AM Rodolphe Bertolini via USRP-users < > [email protected]> wrote: > >> I apologize if this is a duplicated email. >> >> Hello community, >> >> uhd_usrp_probe (and all the others commands) doesn't log the USB version >> to which the USRP is operating. >> >> Instead it gives me the following: >> >> $ uhd_usrp_probe >> [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800; >> UHD_3.14.1.0-release >> [INFO] [X300] X300 initialization sequence... >> [INFO] [X300] Maximum frame size: 1472 bytes. >> [INFO] [X300] Radio 1x clock: 200 MHz >> [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000) >> [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1306 MB/s) >> [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1306 MB/s) >> [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001) >> [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001) >> [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000) >> [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000) >> [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000) >> [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000) >> _____________________________________________________ >> / >> | Device: X-Series Device >> | _____________________________________________________ >> | / >> | | Mboard: X310 >> | | revision: 11 >> | | revision_compat: 7 >> [...] >> >> Any thought? >> > > The X310 has a USB JTAG connection but that isn't really handled through > UHD. > > What are you hoping to do over USB with UHD on an X310? > > Brian >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
