Hi Guys, Another long shot from me, and yes, again it's hardware that's EOL and "Not recommended for new designs", but it happens to be perfect for my needs (a 13cm Amateur Radio Beacon if anyone is remotely interested!)
Anyhow, I have the opportunity to acquire a RFX2400. I understand the RFX2400 has a Band Pass filter that covers 2400 and 2483. Obviously for 2320 this is unwanted, but I understand that it "can easily be bypassed" I can see it on the schematic. Looking at the schematic though, it looks like this might need to be a hardware mod ? by cutting the tracks that go from pin 3 of U202 to the SAW Filter ? Or shorting pins 2 and 5 of the SAW filter ? That said, Pin 5 of U202 suggests a software method might be available. Anyone know for sure ? And if it's software, how, especially from within GRC ? I'd really rather not have to start butchering things if at all possible! Thanks and Best Regards Iain _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
