On 08/08/2019 12:16 PM, ishai alouche via USRP-users wrote:
Hi,
I am using X310 and i try to create very simple setup.
The gnu-radio include the following blocks:
*RFNoC:* Radio --> *RFNoC: *DDC --> Copy --> Sink.
The input signal came from synthesizer.
I run the gnu-radio and the sink window open but I don't receive any
data. When I start the running the X310 turn-on to red the led called
link (near to the GPS led).
can someone please explain me what is the meaning of the red led? This
is the problem?
Another little issue, the X310 can work without gnu-radio at all? i.e.
work only with gnu-radio blocks and without any RFNoC blocks?
Thank in advance
Ishai
--
ישי אלוש
054-5823400
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
You'd be best to include your complete flow-graph, and a better
explanation of what you mean by "cannot receive data".
Also, there's no requirement to use RFNOC with X310 if your performance
requirements don't require it. You can use a more
"conventional" UHD source/sink blocks approach without ever using RFNOC.
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
