Hi, We are currently using N310 to design a prototype MIMO OFDM communications system. We plan to implemented the baseband in a custom RFNOC block. For the MAC and network layers’ functionalities, we hope to implement them on the ARM within Zynq FPGA. So ARM should communicate with the custom RFNOC block and config the RF chips. The baseband will get samples from the RF radio and send TX samples to it. N310 should operate in the embedded mode like an e-series usrp equipment. (N310 supports both host and embedded modes).
But we could not find enough info on N310’s embedded mode operations. 1) Where can we get the SDK for N310 similar to that for E310? 2) If we want to develop the AXI and SPI drivers for the ARM, where can we get source codes of the Linux running on ARM (uboot, kernel, petalinux bsp packages, etc. ) Many thanks in advance!
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
