Thanks Michael, I removed and tried to install properly gnuradio, and I get the following test fail. 97% tests passed, 10 tests failed out of 364
Total Test time (real) = 237.56 sec The following tests FAILED: 243 - qa_polar_decoder_sc (Failed) 244 - qa_polar_decoder_sc_list (Failed) 245 - qa_polar_decoder_sc_systematic (Failed) 246 - qa_polar_encoder (Failed) 247 - qa_polar_encoder_systematic (Failed) 360 - qa_zeromq_pub (Failed) 361 - qa_zeromq_pubsub (Failed) 362 - qa_zeromq_pushpull (Failed) 363 - qa_zeromq_reqrep (Failed) 364 - qa_zeromq_sub (Failed) Errors while running CTest Makefile:107: recipe for target 'test' failed make: *** [test] Error 8 Any suggestion please. I tried to see some of the previous thread and suggested to install python-scipy which I did and sounds I have newest version. Please see below: python-scipy is already the newest version (0.17.0-1). The following packages were automatically installed and are no longer required: libcodec2-0.4 libcppunit-1.13-0v5 libcppunit-dev libglade2-0 libglfw3 libgnuradio-analog3.7.9 libgnuradio-atsc3.7.9 libgnuradio-channels3.7.9 libgnuradio-comedi3.7.9 libgnuradio-digital3.7.9 libgnuradio-dtv3.7.9 libgnuradio-fec3.7.9 libgnuradio-fft3.7.9 libgnuradio-filter3.7.9 libgnuradio-fosphor3.7.0 libgnuradio-noaa3.7.9 libgnuradio-pager3.7.9 libgnuradio-qtgui3.7.9 libgnuradio-trellis3.7.9 libgnuradio-video-sdl3.7.9 libgnuradio-vocoder3.7.9 libgnuradio-wavelet3.7.9 libgnuradio-wxgui3.7.9 libgnuradio-zeromq3.7.9 libgsm1 libjs-jquery-ui libpython3-dev libpython3.5-dev libqwt-dev libqwt5-qt4 libqwt6abi1 libwxbase3.0-0v5 libwxgtk3.0-0v5 python-bs4 python-cairo python-cheetah python-cycler python-dateutil python-glade2 python-gtk2 python-html5lib python-lxml python-matplotlib python-matplotlib-data python-networkx python-opengl python-pyparsing python-qwt5-qt4 python-tz python-wxgtk3.0 python-wxversion python-yaml python3.5-dev rtl-sdr uhd-host Use 'sudo apt autoremove' to remove them. 0 to upgrade, 0 to newly install, 0 to remove and 171 not to upgrade. Regards Rajesh On Sat, Sep 7, 2019 at 7:46 PM Michael Dickens <michael.dick...@ettus.com> wrote: > Hi Rajesh - CMake found your GR38 install, not your GR37 install. You > should pick GR37 or GR38 and go with just it, and remove the one you're not > going with. Then, pick the same branch of gr-ieee802-11. Hope this is > useful! - MLD > > On Sat, Sep 7, 2019 at 9:47 AM Dr. Rajesh Tiwari via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Hi Ron, >> >> Sounds good, seems a bit progress. >> I think other than Cmake policy, attached in screenshot I am almost >> there. Do you think I would need any other requirements? >> >> Regards >> Rajesh >> >> >> On Sat, Sep 7, 2019 at 2:06 PM Ron Economos via USRP-users < >> usrp-users@lists.ettus.com> wrote: >> >>> Okay, here's the complete set of instructions. >>> >>> git clone https://github.com/bastibl/gr-ieee802-11.git >>> >>> cd gr-ieee802-11/ >>> >>> git checkout maint-3.7 >>> >>> mkdir build >>> >>> cd build >>> >>> cmake ../ >>> >>> make >>> >>> sudo make install >>> >>> sudo ldconfig >>> >>> Make sure you use the correct install prefix in the cmake step. You can >>> determine the install prefix with: >>> >>> gnuradio-config-info --prefix >>> >>> cmake ../ will install into the default prefix, which is usr/local. If >>> you have any other prefix, you need to specify that with the cmake command. >>> For example: >>> >>> cmake -DCMAKE_INSTALL_PREFIX=/usr ../ >>> >>> Ron >>> On 9/7/19 05:36, Dr. Rajesh Tiwari wrote: >>> >>> Hi Ron, >>> >>> Thanks for response. I think I am bit confused here..., I am trying to >>> install from https://github.com/bastibl/gr-ieee802-11 and I am getting >>> error. >>> >>> Regards >>> Rajesh >>> >>> On Sat, Sep 7, 2019 at 12:07 PM Ron Economos via USRP-users < >>> usrp-users@lists.ettus.com> wrote: >>> >>>> Opps, should be: >>>> >>>> git checkout maint-3.7 >>>> >>>> Ron >>>> On 9/7/19 04:05, Ron Economos via USRP-users wrote: >>>> >>>> There's a 3.7 version of gr-ieee802-11. In the gr-ieee802-11 directory, >>>> type: >>>> >>>> git checkout maint3.7 >>>> >>>> Ron >>>> On 9/7/19 03:52, Dr. Rajesh Tiwari via USRP-users wrote: >>>> >>>> HI Michael, >>>> >>>> Many thanks for prompt response. I encountered problem in installing >>>> module "gr-ieee802-11" as it seems requiring gnuradio-companion, version >>>> 3.8. I am not able to update my GRC version 3.7 to 3.8. Any suggestion, >>>> please let me know. >>>> >>>> Regards >>>> Rajesh >>>> >>>> On Fri, Sep 6, 2019 at 5:14 PM Michael Dickens < >>>> michael.dick...@ettus.com> wrote: >>>> >>>>> Hi Rajesh - The block "OFDM Sync Short" is part of the GR out-of-tree >>>>> (OOT) module "gr-ieee802-11" ... as are many of the other blocks in the >>>>> image you provided. If that OOT is not installed already, it shouldn't be >>>>> difficult to do so. Hope this is useful! - MLD >>>>> >>>>> On Fri, Sep 6, 2019 at 5:10 AM Dr. Rajesh Tiwari via USRP-users < >>>>> usrp-users@lists.ettus.com> wrote: >>>>> >>>>>> Dear All, >>>>>> >>>>>> I am trying to decode IEEE 802.11a OFDM receiver as per GRC block >>>>>> diagram used in Paper "Bloessl et al(2013), An IEEE 802.11a/g/p OFDM >>>>>> Receiver for GNU Radio, SRIF’13, August 12, 2013, Hong Kong, China.". The >>>>>> screenshot of block diagram given below, In GRC, I didn't find "OFDM Sync >>>>>> Short" block, any help would be appreciated. >>>>>> >>>>>> "GRC block diagram from Bloessl et al(2013), An IEEE 802.11a/g/p OFDM >>>>>> Receiver for GNU Radio, SRIF’13, August 12, 2013, Hong Kong, China" >>>>>> >>>>>> Regards >>>>>> Rajesh >>>>>> >>>>>> _______________________________________________ >>>>>> USRP-users mailing list >>>>>> USRP-users@lists.ettus.com >>>>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>>>> >>>>> >>>>> -- >>>>> Michael Dickens, Mac OS X Programmer >>>>> >>>>> Ettus Research Technical Support >>>>> >>>>> Email: supp...@ettus.com >>>>> >>>>> Web: http://www.ettus.com >>>>> >>>> >>>> _______________________________________________ >>>> USRP-users mailing >>>> listUSRP-users@lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>> >>>> >>>> _______________________________________________ >>>> USRP-users mailing >>>> listUSRP-users@lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>> >>>> _______________________________________________ >>>> USRP-users mailing list >>>> USRP-users@lists.ettus.com >>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>> >>> _______________________________________________ >>> USRP-users mailing list >>> USRP-users@lists.ettus.com >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > > > -- > Michael Dickens, Mac OS X Programmer > > Ettus Research Technical Support > > Email: supp...@ettus.com > > Web: http://www.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com