Hi
> When I plug in the B205 and go to run it for the first time, it takes a
> minute or more to download the stock fpga image to the unit. From that point
> forward, each subsequent run it doesn't have to download the FPGA image. But
> when I disconnect it from USB and re-connect, it must be downloaded again.
Are you connecting it to a USB 2 port ?
Loading the FX3 firmware and FPGA image takes some time but more than
a minute sounds very slow.
> Is it possible to get the B205 to permanently store the fpga image onboard so
> that it boots right up and is ready to go?
No, it doesn't have any on board flash.
Cheers,
Sylvain Munaut
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
