Carlos,

You're correct that currently we can't currently use a TwinRX and a UBX in
the same chassis without running into sample rate / tick rate conflicts. I
would guess that this would extend to a chassis with UBX boards and a
chassis with TwinRX boards if they're encapsulated in the same multi-usrp
object AND streamer. I haven't tried it myself, but I have a feeling that
you might be able to run things correctly if you split each X310 out into
its own streamer (benchmark rate uses a single streamer).

-Sam

On Tue, Oct 22, 2019 at 9:33 AM Carlos Bocanegra via USRP-users <
[email protected]> wrote:

> Hi all,
>
> Can we have daughterboards TwinRX and UBX working under the same multiUSRP
> object? For instance, two TwinRX attached to one USRP and two UBX attached
> to another USRP creating 6 synchronized and phased aligned receiver
> channels?
>
> The discussion below stated that the sampling rate mismatch (100Msps for
> the TwinRX and 200Msps for the UBX) do not allow for simultaneous operation
> under the same USRP. But what about different USRPs?
> https://lists.gnu.org/archive/html/discuss-gnuradio/2017-07/msg00021.html
>
> If I try running the benchmark_rate having two TwinRX on the address 70.2
> and two UBX on the 60.2 like:
> *>> sudo /usr/local/lib/uhd/examples/benchmark_rate --args
> "addr0=192.168.70.2,addr1=192.168.60.2" --rx_channels 0,1,2,3 --rx_subdev
> "A:0 B:0" --rx_rate 1e6 --ref external --pps external*
> I get the error:
> *RuntimeError: Conflicting tick rates: One neighbouring block specifies
> 2e+08 MHz, another 1e+08 MHz.*
>
> I also tried changing the master clock rate to see if we can match them,
> but then I get that the X310 can't change their master clock rate at
> runtime, even when I set these parameters as "stream_args" when I create
> the usrp_source object.
>
> Thanks,
> Carlos
>
> _______________________________________________
> USRP-users mailing list
> [email protected]
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to