Is there a setting you can tweak to change this behavior? Philip
On 4/28/20 5:20 AM, Marcus Müller via USRP-users wrote: > Hey Joshua, > > the firmware can be found in the UHD source code repo under > firmware/e310/battery. If I remember correctly, you'll need avr-gcc, > avr-libc and avrdude (the latter only for flashing using the `make > install` target). > > Note that the software is a bit tight on space on the Attiny88 – so > maybe try to avoid integrating too many features without removing > anything ;) > > Best regards, > Marcus > > On 27.04.20 16:20, Joshua Monson via USRP-users wrote: >> Hello, >> >> >> >> Under the current (COVID19) circumstances, I am having to use my >> E310/E312’s remotely. I have them connected to a remotely controllable >> PDU that allows me to power cycle the E310 devices when they >> occasionally crash (as long as they have been switched on once). >> However, the battery-backed E312s do not respond to the power-cycling in >> the same way the E310s do and thus I am cannot power-cycle them. We >> disconnected the battery and tested the remote power-cycling to no >> avail. Is there a version of the AVR code that would allow me to disable >> the battery and use the input power to power-cycle the device? (I could >> go into the office to reflash the AVR). Alternatively, could I recompile >> the AVR code with different parameters to force this behavior? >> >> >> >> Thanks, >> >> >> Josh >> >> >> >> >> _______________________________________________ >> USRP-users mailing list >> [email protected] >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
