Just a quick and basic question. I want to receive down at like between 1MHz and 10MHz. I have a USRP B210. I knwo that the USRP B210 only goes down to 70MHz. So I bought a Ham It Up ( https://www.nooelec.com/store/ham-it-up.html) upconverter to get down to like 1MHz and 3 MHz. So how does this all work? Does the Ham It Up upconvert the frequency range from 100KHz to 65MHz up to a center frequency of 125MHz? So then isn't it true that if I tune the USRP B210 to 125MHz, I would see my two 1MHz and 3MHz input tones appearing up at 33.5MHz and 35.5MHz? Just want to clarify this in my mind. Thanks a LOT for your help everyone!
-- Sincerely, Alex-M-Humberstone PhD Student Klipsch School of Electrical Engineering New Mexico State University Las Cruces, New Mexico
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
