This should be possible with the Basic_tx board. Sent from my iPhone
> On Jul 5, 2020, at 1:06 AM, Anthony Holland via USRP-users > <[email protected]> wrote: > > Hello Ettus N200 /gnuradio companion gurus! > > A ‘newbie’ question…… > > I have a gnuradio-companion set of blocks that > Produce a custom designed complex periodic waveform > Using the voltage controlled oscillator block in grc. > It outputs a complex periodic waveform at 100kHz. > If I purchase an Ettus N200 with the appropriate daughter boards > (That go down below 1mhz) can I just send the output of > My eco block in grc direct into a UHD RSPN sink to > Have the signal come out in analog format from the N200? > > I’m hesitant to spend the money on the N200 if it’s not going to work. > > Thanks for any tips/pointers! (Maybe a working grc example that works > With N200?) > > Anthony > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
