Hi all,
I have an issue with multiple USRP streams. If they are on separate
daughterboards, but on the same motherboard aka USRP, those streams are
not time aligned. They show a time offset of more than 10us. I use one
USRP source block in GNU Radio and configure it with multiple streams.
At first, I observed this behavior with N310s but now I see it on an
X310 as well. I use a GNU Radio flowgraph where I set the clock to "PC
clock". I'd expect all streams to be in sync because they are handled by
the same object. At least that's what I hope.
On an X310 I have 2 RX streams that observe a signal from across the
room. On an N310, I tried different configurations and I could observe
this delay between daughterboards. They are in sync for one daughterboard.
My flowgraph handles frequency offsets etc. But constant time offsets
between RX streams are problematic. And I suppose they should not be there.
I'd like to use GPSDOs at some point but I don't have a GPS signal in
the lab. And I don't have an octoclock or smth similar. But all of this
shouldn't matter since I only use on USRP for RX. Or am I missing smth?
USRP: N310/X310(with 2x UBX160)
UHD: 3.15LTS
OS: Ubuntu 20.04
GNU Radio 3.9 (aka master)
Cheers
Johannes
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
