Hi Neel, Thanks for your reply. But to use 10 Gbps NIC we need to change the FPGA image to that supports 10 Gbps communication right?
Regards, Koyel Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Neel Pandeya <[email protected]> Sent: Wednesday, August 5, 2020 7:48:56 AM To: Koyel Das (Vehere) <[email protected]> Cc: [email protected] <[email protected]> Subject: Re: [USRP-users] Using PCIe Hello Koyel: Yes, to use PCIe with the USRP X300/X310, you need to download and install the PCIe driver. However, if you're using UHD/C++ or GNU Radio, then I would recommend using 10 Gbps Ethernet instead. --Neel Pandeya On Tue, 4 Aug 2020 at 04:30, Koyel Das (Vehere) via USRP-users <[email protected]<mailto:[email protected]>> wrote: Hi, Do we need to install driver for using PCIe with USRP 2955? If so which link to follow for all installations to be able to use PCIe. Regards, Koyel Get Outlook for iOS<https://aka.ms/o0ukef> _______________________________________________ USRP-users mailing list [email protected]<mailto:[email protected]> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
