Hi,
I've been going through AN-823 (Getting started with RFNoC Development)
and have successfully gotten through the point of simulating the gain
test bench with positive results.
I'm attempting to build the FPGA now with the new OOT module. I've
successfully built with only pre-existing modules and seen it work in my
hardware (E310).
My command is as follows:
~/prefix/rfnoc2/src/uhd-fpga/usrp3/tools/scripts$ ./uhd_image_builder.py
gain ddc fft -t E310_RFNOC -d e31x -I
/home/mike/prefix/rfnoc2/src/rfnoc-tutorial/rfnoc/
I used the gui command ./uhd_image_builder_gui.py but it does not create
the correct device type (-d E310 vs -d e31x).
I've tried using "-I /home/mike/prefix/rfnoc2/src/rfnoc-tutorial/" to no
avail either.
So, it seems like I'm missing a path somewhere in the makefiles that
keeps it from finding the OOT source.
I know this is probably basic makefile stuff but it's not basic to me.
I'm just an FPGA guy.
Thanks,
Mike
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
