Thank you. If I use the python API, and uhd.usrp_source, will the RXs of two daughterboards start to receive the signal at the same time? I donot find the setting here https://wiki.gnuradio.org/index.php/USRP_Source.
Or I have to use C++ API, not in gnuradio? Xiang Ma On Thu, Nov 12, 2020 at 12:18 PM Rob Kossler <[email protected]> wrote: > The multi_usrp can handle multiple usrps but it is also the primary high > level interface for controlling a single USRP (with 1 or more channels). > > > On Thu, Nov 12, 2020 at 2:15 PM Xiang Ma via USRP-users < > [email protected]> wrote: > >> The multi_usrp object might be designed for multiple USRPs, however, I >> have only 1 USRP, just 2 daughterboads, they are using the same reference >> lock. >> When I run the program, shouldn't they start to receive the signal at the >> same time? >> >> Thank you, >> >> On Thu, Nov 12, 2020 at 11:40 AM Xiang Ma <[email protected]> wrote: >> >>> Hi, >>> >>> I have a USRP x310 with 2 UBX daughterboards and GPSDO. >>> >>> I want to use this as two receivers by the two RX in the two >>> daugherboards respectively, and receive the signal at the same time. Do I >>> have to synchronize them or they will automatically start to receive the >>> signal at the same time? >>> >>> Thank you, >>> >>> Xiang Ma >>> >>> >>> -- >>> *Xiang Ma, *Ph.D. Student >>> College of Engineering >>> Utah State University >>> E-mail:[email protected] <[email protected]> >>> >> >> >> -- >> *Xiang Ma, *Ph.D. Student >> College of Engineering >> Utah State University >> E-mail:[email protected] >> _______________________________________________ >> USRP-users mailing list >> [email protected] >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > -- *Xiang Ma, *Ph.D. Student College of Engineering Utah State University E-mail:[email protected]
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
