Hi,
I'm wondering if/how I can control a B2xx device from an N310. I use the
B2xx as an LO for shared LO operations from an N310. Presently, I use a
laptop to control my B200mini, but I am wondering if this control can be
done directly from the N310. I realize that the N310 USB port is not USB3
but since my streaming rates for a CW tone are as slow as possible,
hopefully that won't matter.
I have connected the B200mini to the N310 USB port, but I can't see the
B200mini when I run uhd_find_devices. I have copied the B2xx FPGA images
to the /usr/share/uhd/images/ folder and I have copied the file
uhd-usrp.rules to the /etc/udev/rules.d/ folder and rebooted the N310, but
still no luck.
The following is the output of the "lsusb" and "uhd_find_devices"
commands. The "lsusb" command shows the presence of the Cypress device,
but the device is still not found.
Suggestions?
Rob
root@ni-n3xx-3144673:~# lsusb
Bus 001 Device 003: ID 2500:0021 Cypress WestBridge
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@ni-n3xx-3144673:~# uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 9.2.0; Boost_107100;
UHD_4.0.0.0-0-g90ce6062
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
serial: 3144673
claimed: False
mgmt_addr: 127.0.0.1
product: n310
type: n3xx
root@ni-n3xx-3144673:~#
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
