Hi Marcus, Thank you very much for your response. I'm using GNU Radio. Is there a way to set bursty traffic in GNU Radio Companion?
Huacheng On Thu, Apr 22, 2021 at 1:07 PM Marcus D Leech <[email protected]> wrote: > If you set up the steam to be a continuous stream, the USRP expects > continuous samples, and if it doesn’t get them, it produces errors. > > You want to configure your stream for bursts, probably timed bursts. > > Are you using Gnu Radio, or the UHD API directly? > > Sent from my iPhone > > > On Apr 22, 2021, at 1:01 PM, Huacheng Zeng <[email protected]> > wrote: > > > > > > Hi all, > > > > I am using USRP X310 as an MIMO transmitter to send two streams from a > computer. The sampling rate is set to 2 MSps. When the computer > continuously sends data to USRP, it works well. When the computer sends > data at a slow rate (e.g., 10 packets per second), USRP prints out > "LLLLLLLLLL" message and it seems the USRP does not transmit any signal. > > > > I expect USRP to transmit signal when it receives data from the computer > and not transmit signal if no data comes in. > > > > Any advice would be appreciated! > > > > Best, > > Huacheng > > > > > > _______________________________________________ > > USRP-users mailing list -- [email protected] > > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
