Hi Jeff, I don't have an E320, but I did not experience any space issue using 16GB cards with either N310 or N321. BTW, I used bmaptool for the writing which is super fast compared to the other methods. Rob
On Wed, May 12, 2021 at 12:24 PM Jeffrey P Long <[email protected]> wrote: > I have a E320 that I wanted to update to UHD 4.0. I am currently at 3.15. > I downloaded the mender artifact and image from files.ettus.com. > > > > I first tried to mend it. I scp’d it and attempted it. The following is > the result from that. > > > > root@ni-e320-31DCD15:~# mender -rootfs /home/root/usrp_e320_fs.mender > > INFO[0000] Configuration file does not exist: /var/lib/mender/mender.conf > module=config > > INFO[0000] Loaded configuration file: /etc/mender/mender.conf > module=config > > INFO[0000] Mender running on partition: /dev/mmcblk0p3 module=main > > INFO[0000] Start updating from local image file: > [/home/root/usrp_e320_fs.mender] module=rootfs > > Installing update from the artifact of size 89829376 > > INFO[0000] no public key was provided for authenticating the artifact > module=installer > > ERRO[0000] Installation failed: installer: failed to read and install > update: will not install artifact with state-scripts when installing from > cmd-line. Use -f to override module=rootfs > > ERRO[0000] installer: failed to read and install update: will not install > artifact with state-scripts when installing from cmd-line. Use -f to > override module=main > > root@ni-e320-31DCD15:~# > > > > During this process, during the scp I noticed that it complained about the > disk being full. I am using a 16 GB sd card (actually the one that came > with it) and there is nothing extra on it other than the standard UHD 3.15 > etc. Thinking that might be an issue I decided to try popping the cover and > building a new 16 GB card from scratch using the image I downloaded. > > > > After doing: > > > > jplong@mm241897-pc:~/proj/ettus_e320/e3xx_e320_sdimg_default-v4.0.0.0$ > sudo dd if=usrp_e320_fs.sdimg of=/dev/sda bs=1M > > dd: error writing '/dev/sda': No space left on device > > 14773+0 records in > > 14772+0 records out > > 15489564672 bytes (15 GB, 14 GiB) copied, 1904.36 s, 8.1 MB/s > > jplong@mm241897-pc:~/proj/ettus_e320/e3xx_e320_sdimg_default-v4.0.0.0$ > > > > When I tried to boot this popped up so that is probably no good based on > it running out of space: > > [FAILED] Failed to start File System Check on /dev/mmcblk0p4. > > Then it went into emergency mode. > > > > Does UHD 4.0 require a bigger disk? > > > > Thanks > > Jeff Long > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
