What happens if you don’t specify any args at all? Sent from my iPhone
> On May 14, 2021, at 3:20 PM, Martin <[email protected]> wrote: > > Hi, > > I have an E310 sg1 which had an older sdimg on it (with uhd 3.9.2). UHD > worked fine with this older image. > > But now I updated the sdcard with the UHD 3.15.0.0 sd image for E310 sg1 > > usrp_e310_fs.sdimg from e3xx_e310_sg1_sdimg_default-v3.15.0.0.zip > > It boots fine but now it does not find its own uhd hardware > > This is what I get when I run these commands on the device (through serial or > ssh) > > root@ni-e31x:~# uhd_usrp_probe --args "type=e300" > Error: LookupError: KeyError: No devices found for -----> > Device Address: > type: e300 > > root@ni-e31x:~# uhd_find_devices > [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; > UHD_3.15.0.0-0-gaea0e2de > -------------------------------------------------- > -- UHD Device 0 > -------------------------------------------------- > Device Address: > serial: > claimed: False > mgmt_addr: 127.0.0.1 > product: > reachable: No > type: > > > What am I doing wrong here? > > Should I use a different device address > > I also tried -args "addr=127.0.0.1" But that of course does not work. (as > expected) > > Or maybe it has to do that this is an older sg1 usrp E310. > Does that work differently or maybe the sg1 image is less tested. > > Please enlighten me. > > Thanks in advance, > > Martin Dudok van Heel > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] _______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
