Just for sanity, this is the post I used to get all the settings correct. So far it’s the only documentation I can find for how to set up UHD 4.0 with fosphor.
http://ettus.80997.x6.nabble.com/USRP-users-setting-up-gr-fosphor-on-uhd-4-td16532.html I also had some issues with the QT window locking up the widget controls, so I used zmq sockets to pipe the 2 byte streams into another flowgraph that hosts the fosphor display. <end transmission> > On May 19, 2021, at 13:11, [email protected] wrote: > > > Yes. please have a look. > > [INFO] [UHD] linux; GNU C++ version 9.3.0; Boost_107100; > UHD_4.0.0.0-50-ge520e3ff > [INFO] [X300] X300 initialization sequence... > [INFO] [X300] Maximum frame size: 8000 bytes. > [INFO] [GPS] Found an internal GPSDO: LC_XO, Firmware Rev 0.929a > [INFO] [X300] Radio 1x clock: 200 MHz > _____________________________________________________ > / > | Device: X-Series Device > | _____________________________________________________ > | / > | | Mboard: X310 > | | revision: 11 > | | revision_compat: 7 > | | product: 30818 > | | mac-addr0: 00:80:2f:22:ff:b4 > | | mac-addr1: 00:80:2f:22:ff:b5 > | | gateway: 192.168.10.1 > | | ip-addr0: 192.168.10.2 > | | subnet0: 255.255.255.0 > | | ip-addr1: 192.168.20.2 > | | subnet1: 255.255.255.0 > | | ip-addr2: 192.168.30.2 > | | subnet2: 255.255.255.0 > | | ip-addr3: 192.168.40.2 > | | subnet3: 255.255.255.0 > | | serial: 3176C83 > | | FW Version: 6.0 > | | FPGA Version: 38.0 > | | FPGA git hash: e520e3f-dirty > | | > | | Time sources: internal, external, gpsdo > | | Clock sources: internal, external, gpsdo > | | Sensors: gps_servo, gps_gprmc, gps_time, gps_gpgga, gps_locked, > ref_locked > | _____________________________________________________ > | / > | | RFNoC blocks on this device: > | | > | | * 0/DDC#0 > | | * 0/DDC#1 > | | * 0/DUC#0 > | | * 0/DUC#1 > | | * 0/FFT#0 > | | * 0/Fosphor#0 > | | * 0/Radio#0 > | | * 0/Radio#1 > | _____________________________________________________ > | / > | | Static connections on this device: > | | > | | * 0/SEP#0:0==>0/DUC#0:0 > | | * 0/DUC#0:0==>0/Radio#0:0 > | | * 0/Radio#0:0==>0/DDC#0:0 > | | * 0/DDC#0:0==>0/SEP#0:0 > | | * 0/Radio#0:1==>0/DDC#0:1 > | | * 0/DDC#0:1==>0/SEP#1:0 > | | * 0/SEP#2:0==>0/DUC#1:0 > | | * 0/DUC#1:0==>0/Radio#1:0 > | | * 0/Radio#1:0==>0/DDC#1:0 > | | * 0/DDC#1:0==>0/SEP#2:0 > | | * 0/Radio#1:1==>0/DDC#1:1 > | | * 0/DDC#1:1==>0/SEP#3:0 > | | * 0/SEP#4:0==>0/FFT#0:0 > | | * 0/FFT#0:0==>0/SEP#4:0 > | | * 0/SEP#5:0==>0/Fosphor#0:0 > | | * 0/Fosphor#0:0==>0/SEP#5:0 > | | * 0/Fosphor#0:1==>0/SEP#6:0 > | _____________________________________________________ > | / > | | TX Dboard: dboard > | | ID: UBX-160 v2 (0x007d) > | | Serial: 315EA14 > | | _____________________________________________________ > | | / > | | | TX Frontend: 0 > | | | Name: UBX TX > | | | Antennas: TX/RX, CAL > | | | Sensors: lo_locked > | | | Freq range: 10.000 to 6000.000 MHz > | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > | | | Connection Type: QI > | | | Uses LO offset: No > | _____________________________________________________ > | / > | | RX Dboard: dboard > | | ID: UBX-160 v2 (0x007e) > | | Serial: 315EA14 > | | _____________________________________________________ > | | / > | | | RX Frontend: 0 > | | | Name: UBX RX > | | | Antennas: TX/RX, RX2, CAL > | | | Sensors: lo_locked > | | | Freq range: 10.000 to 6000.000 MHz > | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > | | | Connection Type: IQ > | | | Uses LO offset: No > | _____________________________________________________ > | / > | | TX Dboard: dboard > | | ID: UBX-160 v2 (0x007d) > | | Serial: 3158364 > | | _____________________________________________________ > | | / > | | | TX Frontend: 0 > | | | Name: UBX TX > | | | Antennas: TX/RX, CAL > | | | Sensors: lo_locked > | | | Freq range: 10.000 to 6000.000 MHz > | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > | | | Connection Type: QI > | | | Uses LO offset: No > | _____________________________________________________ > | / > | | RX Dboard: dboard > | | ID: UBX-160 v2 (0x007e) > | | Serial: 3158364 > | | _____________________________________________________ > | | / > | | | RX Frontend: 0 > | | | Name: UBX RX > | | | Antennas: TX/RX, RX2, CAL > | | | Sensors: lo_locked > | | | Freq range: 10.000 to 6000.000 MHz > | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > | | | Connection Type: IQ > | | | Uses LO offset: No > > > THANKS > > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected]
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
