(Resent to include mailing list) Hi Guy,
I've recently used B100s with the LFRX, BasicRX, and (EOL) TVRX2 with the latest UHD and GNU Radio 3.8 on Ubuntu 20.04. A challenge for me with the LFRX/TX and BasicRX/TX was finding the correct sub-device specification as they can acquire/transmit an IQ pair or real-valued signals. In addition, I required a Hilbert transform to convert real-valued samples in baseband to complex for some processing in GNU Radio for Rx. There are a lot of questions about these daughtercards in the mailing list archive and often the questions seem to be about sub-device specification and real-valued versus IQ. Enjoy the B100! HTH, Richard On Aug 2, 2021, at 09:47, Guy Mengel <[email protected]> wrote: Hi All, I am finally going to get started using an older B100 USRP with the LFTX, LFRX, WBX daughter boards. I purchased these from a well known amateur radio op in January of this year. I had played with it for a short time on Ubuntu 18.04 with the older unsupported Python2 interface, this was a start. Then the Covid Pandemic hit. Well, I am now back. Are there any users in the group using the B100 USRP with the LFTX, LFRX, WBX daughter boards using a newer Ubuntu 20.04 with updated Python 3.X with GNURADIO? I wanted to see if there were any still using this older SDR. My plans are to experiment with it and create a rig to be used at HF and possibly UHF to microwave down the road. I would also like to have pointers too! Thanks! Guy Mengel N1GMM _______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected] _______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
