Understood. Also, I noticed in UHD 4.0 there is an rfnoc_replay_samples_from_file.cpp that exists instead of the replay_samples_from_file.cpp mentioned in UHD 3.15 so are the steps to building the replay example the same as highlighted in the link https://kb.ettus.com/Using_the_RFNoC_Replay_Block On Saturday, August 7, 2021, 12:49:35 AM EDT, Jonathon Pendlum <[email protected]> wrote: Hi, Those instructions are for UHD 3.15. With UHD 4.0, the replay block is included by default in the N310, as you can see here in the N310's FPGA image yaml file: https://github.com/EttusResearch/uhd/blob/UHD-4.0/fpga/usrp3/top/n3xx/n310_rfnoc_image_core.yml#L71. Jonathon On Fri, Aug 6, 2021 at 9:44 PM Tellrell White via USRP-users <[email protected]> wrote:
Hello Currently, I'm trying to reproduce the RFNoC replay example shown at the following link https://kb.ettus.com/Using_the_RFNoC_Replay_Block using the USRP N310. The version of UHD that I'm using is 4.0, which by default already has RFNoC enabled. According to the link above, if you're using the N310, than you're instructed to modify the file fpga-src/top/n3xx/n3xx_core.v with the appropriate changes which instantiates the noc_block_replay instead of noc_block_axi_dma_fifo, and then rebuild the image. My question is if I'm using UHD 4.0, do I need to make any of the changes discussed above or is the RFNoC replay block already included in the default N310 FPGA image as highlighted in the following link, which is more updated? https://kb.ettus.com/Getting_Started_with_RFNoC_in_UHD_4.0#Setting_Up_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
