PHY_CTRL_STATUS is for the SFP port, so not what you're looking for. You can look at the schematic for the E320 here: https://kb.ettus.com/images/6/65/Neon_Public.pdf
There is a watchdog built into the E320 that I think is on by default. It's on page 16 (the Real Time Clock). Are you referring to JTAG port J6? You can see the pinout for that also on page 16. I would think pin 10 would reset the microcontroller, but I haven't tried it. Thanks, Wade On Mon, Aug 9, 2021 at 3:54 PM <[email protected]> wrote: > I noticed there’s an ARM JTAG port underneath the board with a system > reset pin. However, it doesn’t appear to do anything when grounded. Does > anyone know if the JTAG port is disabled, or if it has some different > pinout than the typical 10 pin ARM JTAG? > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
