On 2021-08-19 8:55 p.m., [email protected] wrote:
For my application I need to /frequency/ synchronize a B205-mini
transmitter with a B210 receiver. Is this possible? I can’t seem to
get it to work with the units I have. Can someone shed some light on
why that might be the case?
Note, that I am not asking about phase synchronization. I have been
able to get 2x B210s to phase synchronize in post using higher order
software calibration but the same does not work in the case of 1x
B205-mini + 1x B210. In both cases I was using a common 10 MHz reference.
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
The synchronization servo on the B205 is really not up to the task of
synchronizing with other devices--particularly not devices that use an
entirely
different synchronization architecture.
I'm curious about your use-case. In the "real world", it's exceedingly
rare for the TX and RX to be tightly frequency synchronized--instead the
RX demodulation/decoding chain uses a PLL synchronizer of some sort
to assure proper symbol alignment as signals come in.
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
