On 2021-10-23 5:58 p.m., Ivan Zahartchuk wrote:
I want to create FPGA firmware for USRP E310 with window function but
I get the error I described above. My yaml file is also attached
above. I need to do windowing and FFT on the FPGA side. And understand
why FFT returns zero values even when it is configured to produce
complex data.
image.png
пт, 22 окт. 2021 г. в 17:55, Marcus D. Leech <[email protected]
<mailto:[email protected]>>:
On 2021-10-22 6:05 a.m., Ivan Zahartchuk wrote:
Yes I am setting fft for magnitudes. On the front side, I am
doing a log. I perfectly understand where infinity comes from. I
don’t understand why the FFT returns 0. But how can I configure
the Window?
What does uhd_usrp_probe show in the "RFNOC Blocks" section on
this device?
I think the window RFNOC function in GNu Radio takes a list of the
window values as a parameter--you can populate that with any of
the window.* functions
within Gnu Radio.
пт, 22 окт. 2021 г. в 01:51, Marcus D. Leech
<[email protected] <mailto:[email protected]>>:
On 2021-10-21 6:40 p.m., Ivan Zahartchuk wrote:
Hello, I have a problem that when receiving samples from the
USRP E310 board, after the FFT block at low gain, zero
values are received. After that I log them and get infinity.
I wanted to figure out what the problem is, but I have no
idea, maybe the Window block will fix the situation. But
when building my yaml file, I get the error: [ERR] 2
Unresolved connection(s) [ERR] (window0-out_0 ->
fft0-in0) [ERR] (fft0-out_0 -> ep1-in_0) [INF]
(('radio0', 'ctrl_port', 'master'),) [INF]
(('radio0', 'time_keeper', 'listener'),) [INF]
(('radio0', 'x300_radio', 'slave'),) [INF]
(('_device_', 'ctrlport_radio', 'slave'),) [INF]
(('_device_', 'time_keeper', 'broadcaster'),) [INF]
(('_device_', 'x300_radio', 'master'),) Please tell me what
could be the problem and how can I add the Window block to
my image?
_______________________________________________
USRP-users mailing list [email protected]
<mailto:[email protected]>
To unsubscribe send an email [email protected]
<mailto:[email protected]>
Do you have your FFT configured for log output? Because the
logarithm of zero is undefined.
_______________________________________________
USRP-users mailing list -- [email protected]
<mailto:[email protected]>
To unsubscribe send an email to
[email protected]
<mailto:[email protected]>
I noticed looking at your .yaml file that it references x300_radio
blocks, and since this is an E310, that may not be appropriate? I know
that there have
historically been considerable differences between the X300 RFNOC
radio blocks and those for E310.
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
