Thanks and I will try it.
谢谢，有任何问题请随时与我联系！ —————————————————————— 李泽远|研发工程师 北京曾益科技有限公司 手机：13121162044 地址：北京市海淀区中关村大街中关村SOHO 1108 网址： <http://www.zengyi-tech.com> www.zengyi-tech.com 发件人: Michael Dickens <[email protected]> 发送时间: 2021年10月27日 22:06 收件人: Marcus D. Leech <[email protected]> 抄送: 李泽远 <[email protected]>; USRP list <[email protected]> 主题: Re: [USRP-users] Re: 答复: Re: 答复: 答复: Re: 答复: Re: How to use External LO on N310 device? Forgot to mention earlier: at device initialization you have to supply the external LO at 5 GHz, as well as set the device argument as noted. Once the device is fully initialized then you can change the center frequency & the supplied LO must be 2x that. Hope this helps! - MLD On Wed, Oct 27, 2021 at 9:51 AM Marcus D. Leech <[email protected] <mailto:[email protected]> > wrote: On 2021-10-27 03:11, [email protected] <mailto:[email protected]> wrote: I set the correct device arguments,but it doesn’t work correctly and also there is no error report. I don’t what can I do next . So I want to config this argument in mpm.conf file or usrp_hwd.conf file to try to use external LO . I couldn’t find this file named "usrp-hwd.conf" in “/usr” .and also “mpm.conf” Again, modifying the MPM config file is NOT necessary to get external LO to work. What frequency are you trying to use? Can you share the lines of code you use to set up the N310 for shared LO operation--including the initial device "make" with device arguments, etc. _______________________________________________ USRP-users mailing list -- [email protected] <mailto:[email protected]> To unsubscribe send an email to [email protected] <mailto:[email protected]>
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
