I see what you’re saying. Are you recommending setting both to external so the paths are equal?
<end transmission> > On Jan 14, 2022, at 09:25, Rob Kossler <[email protected]> wrote: > > > Hi Paul, > Based on the block diagram, I think I would set both LOs to use an external > source. I would set the Tx0 export the LO on Tx Output 0 and then route it > directly back into Tx Input 1 which then goes to a 1:2 splitter to feed both > inputs. In addition to exporting the LO and setting the LO source to > external for both ports, you also need to enable the Tx Output 0 (disabled by > default). I've forgotten the command to do so. > Rob > > > >> On Fri, Jan 14, 2022 at 1:11 AM Paul Atreides <[email protected]> wrote: >> I am trying to configure the N321 to take some TX phase measurements between >> RF0 and RF1 >> I have updated the file system to the latest release using the KB guidance. >> >> My host/software side is: >> GNURadio 3.9.5 >> UHD 4.1.0.5 >> Ubuntu 20.04 >> >> My gr-uhd block has the LO settings: >> Channel 0 export = true >> Channel 0 LO = internal >> >> Channel 1 export = false >> Channel 1 LO = external >> >> On the hardware side am I understanding the LO diagram correctly that in >> order to achieve the highest phase accuracy between channels i need to share >> the LO between the transmit ports of RF0 and RF1? >> If so, would I do that by physically connecting the TX LO OUT0 (really 0-3) >> to TX LO IN1? >> >> Am I missing anything obvious for the settings and/or is there a more >> desirable way to do this? >> >> Thanks >> >> <end transmission> >> _______________________________________________ >> USRP-users mailing list -- [email protected] >> To unsubscribe send an email to [email protected]
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
