Just to add one more data point, I just ran test_timed_commands on a different computer connected to an X310 -- still UHD 4.1. I have the same problem with that device where it looks like timed commands are not working right.
Thanks, Jim ________________________________ From: Jim Palladino <[email protected]> Sent: Wednesday, February 2, 2022 10:44 AM To: Marcus D. Leech <[email protected]>; [email protected] <[email protected]> Subject: Re: [USRP-users] Re: Timed Commands Not Working Correct -- I am using the stock FPGA image for the E320 and the N320. Thanks, Jim ________________________________ From: Marcus D. Leech <[email protected]> Sent: Wednesday, February 2, 2022 10:39 AM To: Jim Palladino <[email protected]>; [email protected] <[email protected]> Subject: Re: [USRP-users] Re: Timed Commands Not Working On 2022-02-02 10:21, Jim Palladino wrote: Thanks Marcus. Please let me know if R&D comes back with anything. I'm at a bit of a loss . . . Thanks, Jim ________________________________ Just to clarify--this is with the stock FPGA image, correct?
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
