Hi Jonathan, We use fiber all the time with the X310 - both single mode and multimode SFP+ transceivers. We started off using Intel transceivers, but later moved to much cheaper 10Gtek and FiberStore transceivers. On occasion we have had trouble with a transceiver when used in an Intel NIC such as X520, but I don't think we've seen an issue with the transceiver not working in the X310. Rob
On Tue, Feb 8, 2022 at 3:36 PM Jonathan Pratt <[email protected]> wrote: > Hi usrp-users > > > Has anyone had experience using 10GbE SFP+ modules on the X310 for fibre > connections rather than copper? > > We have an X310 and a 10GbE switch. Both are able to take SFP+ modules. > The X310 is programmed with an FPGA image that allows for 1GbE on port 0 > and 10GbE on port 1. > > We have some 1GbE fibre SFP+ modules which work on the switch and the X310 > (in either port) for 1Gb ethernet. > We have some 10GbE fibre SFP+ modules which work on the switch but won't > work on the X310 (in either port). We can use them on the switch to > communicate with a 1GbE SFP+ module on the X310 (in either port). > We had a similar (but reverse) problem with a 10GbE Cu SFP+ module that > would work on the X310 but not in an NIC that we were trying to use at the > time. > > So does anyone have experience with a brand of 10GbE fibre SFP+ module > that works with the X310 or is there a reason why this won't work? > > Thanks! > Jonathan Pratt > > > > > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
