Hi all, We are trying to use the USRP E312 with ssh over ethernet. I am setting a static IP with
ifconfig eth0 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx up Which works fine, connecting to the USRP with static IP address set on my laptop. The issue is that we need to disconnect the ethernet to test transmission on a drone. When we reconnect the ethernet cable the ip address is not re-established. I have to connect with serial cable and re-run the above command to bring the ethernet back up. Is there a way to have this done automatically on the E312? It does not appear to have network-manager installed (like e.g. Ubuntu). I have modified /etc/init.d/interfaces but it seems to ignore this file completely, not even using it to set IP on system boot. Any ideas? Kind regards, David [1641888664830]<https://gmvnsl.com/> David Scott Junior Software Developer T. +44 (0)115 666 7200 GMV NSL Sir Colin Campbell Building, Innovation Park,Triumph Road, Nottingham, NG7 2TU | UK [1641888719061] [1641888732309] [1641888741793] [1641888750078] [1641888773993] [1641888694694] www.gmv.com<http://www.gmv.com> P Please consider the environment before printing this e-mail.
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
