Hi,
On 15.02.23 18:22, Marcus D. Leech wrote:
*
*
2)Is UHD able to be run on an Android device and control a USRP SDR (using
USB OTG,
for example)? If not, are there other ways to have an Androidapp control
the USRP
SDR in real time?
There is no port of UHD to Android that I know of.
There is one – at the very least the one done by Basti Bloessl for his GNU Radio on
Android work. I also think Tom Rondeau had something similar demoed before, but that is so
long ago that I'd neither trust my memory nor assume it's still useful.
*
3) Custom B200 firmware: if I program the FPGA over USB (using Xilinx HW
manager),
will the image persist if I turnoff power to device (I.e.disconnect USB)?
In other
words, is there a FLASH or some other persistent storage on-board to hold
on to
user-defined FPGA firmware after power-down?
There's insufficient FLASH onboard the B2xx devices to support a persistent
FPGA image.
Corollary: short of leading to electrical damage somehow, it's hard to permanently brick
that device.
Best regards,
Marcus
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
