Hi, I am trying to get a working multi-usrp setup with both X300 and N300.
I currently have a signal generator generating a 10 MHz clock and a 1PPS signal. Those are connected to a splitter (each), and then connected to both X300s REF IN and 1PPS IN. This setup works, and with srsRAN I can use two X300's to get an LTE 2x2 MIMO setup with the throughput I get with one X300. If I connect the same signal to the N300, the N300's PLL fails to get a lock. Does anyone have any idea what goes wrong there? We're getting a WR switch somewhere in the future, but I would like to be able to test with the N300s before it arrives. Regards, Bas Vermeulen ________________________________ CONFIDENTIALITY NOTICE: This message (including any attachments) may contain Molex confidential information, protected by law. If this message is confidential, forwarding it to individuals, other than those with a need to know, without the permission of the sender, is prohibited. This message is also intended for a specific individual. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message or taking of any action based upon it, is strictly prohibited. English | Chinese | Japanese www.molex.com/confidentiality.html
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
