Many thanks for your quick reply Wade! All the best Marino
On Wed, 21 Jun 2023 at 16:44, Wade Fife <wade.f...@ettus.com> wrote: > Hi Marino, > > The register is there, but it sounds like we don't expose it through the > API. This utility is out of date, but it can still be used to read the > temperature value: > > ~/uhd/firmware/usrp3/x300$ python2 x300_debug.py --addr=192.168.10.2 > --peek=0xA02C > > In that command, 192.168.10.2 is the IP address for the USRP's SFP port > and 0xA02C is the address of the temperature register. That will return the > raw ADC code from the XADC. To convert that to a temperature, use this > equation: > > Temperature(°C) = XADC_Code * 503.975 / 4096 - 273.15 > > Thanks, > > Wade > > > On Wed, Jun 21, 2023 at 7:45 AM cyberphox <cyberp...@gmail.com> wrote: > >> Thanks Marcus. I could not find any temperature sensors :( >> >> >> On Thu, 15 Jun 2023 at 14:33, Marcus D. Leech <patchvonbr...@gmail.com> >> wrote: >> >>> On 15/06/2023 06:31, cyberphox wrote: >>> > Hi All >>> > >>> > I would like to read the FPGA core temperature of the Kintex within >>> > the USRP2974, and any other temperature sensor available, ideally on >>> > the RF boards. >>> > >>> > >>> > Is there an API for this? >>> > >>> > thanks >>> > marino >>> You can use the "usrp_list_sensors" examples app to list all the sensors >>> that are available to the API -- and look at the code >>> to see how it uses the sensors API. >>> >>> >>> _______________________________________________ >>> USRP-users mailing list -- usrp-users@lists.ettus.com >>> To unsubscribe send an email to usrp-users-le...@lists.ettus.com >>> >> _______________________________________________ >> USRP-users mailing list -- usrp-users@lists.ettus.com >> To unsubscribe send an email to usrp-users-le...@lists.ettus.com >> >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com