On 08/08/2023 14:52, Michelle Salehi wrote:
Thank you, I saw that. In the past I have been able to customize my
codes with python. Would I be able to program the pins with the
Python API?
Thank you!
Michelle
------------------------------------------------------------------------
*From:* Marcus D. Leech <[email protected]>
*Sent:* Tuesday, August 8, 2023 1:44 PM
*To:* [email protected] <[email protected]>
*Subject:* [USRP-users] Re: Advice on transmitting trigger signal
before pulse frequency on ettus x310 and GNU radio
On 08/08/2023 14:42, Michelle Salehi wrote:
Hi, I have a pulse frequency setup in GNU radio to transmit through
an ettus x310. I need to add a TTL signal right before the pulses
and have it turned off right after the pulse. What is the best way
to send this type of trigger signal on an ettus x310?
Thanks for your help,
Michelle
I believe that gr-uhd exposes the entirety of the GPIO interface, and
the UHD straight-Python interface does also.
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
