Hi Martin,
Oh! I didn't know there was a debug option. The line says this:
[DEB] Executing the following command: /bin/bash -c ". ./setupenv.sh &&
make X440_X4_200
IMAGE_CORE=/home/user/rfnoc/gr-ettus/rfnoc-nbc_v2/rfnoc/icores/x440_200_rfnoc_image_core.v
EDGE_FILE=/home/user/rfnoc/gr-ettus/rfnoc-nbc_v2/rfnoc/icores/x440_200_static_router.hex
RFNOC_OOT_MAKEFILE_SRCS=/home/user/rfnoc/gr_ettus/rfnoc-nbc_v2/rfnoc/fpga/rfnoc_block_nbcv2/Makefile.srcs"
I'll take a look at the 4.7 version as suggested.
Kind Regards,
El jue, 18 jul 2024 a las 14:35, Martin Braun (<martin.br...@ettus.com>)
escribió:
> Hi Maria,
>
> I'm not sure what's going on. Can you run rfnoc_image_builder -l debug
> [...your options...] and post the line that says "Executing the following
> command: ..."? I wonder if RFNOC_OOT_MAKEFILE_SRCS is correctly set.
>
> BTW, if you just upgraded to 4.6, consider upgrading to 4.7. On the X440,
> very little changed, but the image builder got its first overhaul in a
> while, and therefore there's a better chance of supporting folks using that.
> That said, it's a bigger upgrade path because we changed some things in
> the way the image core YAML files are constructed.
>
> --M
>
> On Thu, Jul 18, 2024 at 11:32 AM Maria Muñoz <mamuk...@gmail.com> wrote:
>
>> Hi Martin,
>>
>> I had another issue once I resolved the YML problem. I start the
>> synthesis with this command:
>>
>> rfnoc_image_builder -y x440_200_nbc_rfnoc_image_core.yml -d x440 -t
>> X440_X4_200 --fpga-dir ~/rfnoc/uhd/fpga/
>>
>> But Vivado can't find my OOT block:
>>
>> ERROR: [Synth 8-439] module 'rfnoc_block_nbcv2' not found
>> [~/rfnoc/gr-ettus/rfnoc-nbc_v2/rfnoc/icores/x440_200_rfnoc_image_core.v:1512]
>>
>> I've used the x440_200_nbc_rfnoc_image_core.yml example
>> in uhd/fpga/usrp3/top/x400/ but added a new EP to connect my block. I've
>> also reviewed the x440_200_rfnoc_image_core.v generated and it instance my
>> module name correctly.
>>
>> As it is my first time using UHD 4.6 (I usually use 4.0) I don't know if
>> I need to do any other modifications to Makefiles to find my block. I tried
>> to indicate the OOT folder with the -I option in rfnoc_image_builder, but I
>> got the same error.
>>
>> What I usually do with 4.0 is the following:
>> 1) Generate block with rfnocmodtool
>> 2) Modify grc, lib, include, FPGA, block, and icore folders to include my
>> block code. Add to the fpga/Makefile.srcs all the vhdl/verilog sources for
>> my FPGA code.
>> 3) Build my block
>> 4) Move to the icore folder of my block and run the rfnoc_image_builder
>> command.
>>
>> Is there something that I'm missing for the 4.6 version?
>>
>> Kind Regards,
>>
>> Maria
>>
>>
>> El mié, 17 jul 2024 a las 13:13, Martin Braun (<martin.br...@ettus.com>)
>> escribió:
>>
>>> In that case you can just do
>>>
>>> apt install python3-ruamel.yaml
>>>
>>> and make sure you have no other version installed.
>>>
>>> --M
>>>
>>> On Wed, Jul 17, 2024 at 12:22 PM Maria Muñoz <mamuk...@gmail.com> wrote:
>>>
>>>> Hi Martin,
>>>> .
>>>> Thanks for your answer. I will do the workaround.
>>>> By the way, I'm using Ubuntu 20.04.
>>>>
>>>> Kind Regards,
>>>>
>>>> El mié, 17 jul 2024 a las 12:07, Martin Braun (<martin.br...@ettus.com>)
>>>> escribió:
>>>>
>>>>> Quick addendum: If you do update to 4.7, you will need to update some
>>>>> image core files, because we changed stuff for X410 and X440. Best to go
>>>>> back to the YAML files we provide in-tree and add your OOT blocks to
>>>>> those.
>>>>>
>>>>> --M
>>>>>
>>>>> On Wed, Jul 17, 2024 at 12:05 PM Martin Braun <martin.br...@ettus.com>
>>>>> wrote:
>>>>>
>>>>>> Hey Maria,
>>>>>>
>>>>>> thanks for reporting this issue. Some pointers:
>>>>>> - As a workaround, you can install ruamel.yaml 0.17. I don't know how
>>>>>> you installed it before, but you can do `pip install
>>>>>> "ruamel.yaml<0.18.0"`
>>>>>> if you used pip before.
>>>>>> - I need to double-check this, but I think UHD 4.7 has a fix for
>>>>>> this. If not, we will need to fix this ASAP (note to myself)
>>>>>>
>>>>>>
>>>>>> Can you provide some info on your system (OS, distribution, etc.)?
>>>>>> Many thanks,
>>>>>>
>>>>>> Martin
>>>>>>
>>>>>> On Wed, Jul 17, 2024 at 11:05 AM Maria Muñoz <mamuk...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I'm trying to use the UHD 4.6 version with RFNoC to build an image
>>>>>>> for the x440 USRP device. I used UHD 4.0 for USRP E320 without a
>>>>>>> problem,
>>>>>>> but now I have an issue with the YML files for the X440 image building.
>>>>>>> I have installed UHD 4.6, GNURadio 3.8, and gr-ettus (to have the
>>>>>>> rfnocmodtool command).
>>>>>>> I can build my block in software without issues but when I try to
>>>>>>> create the FPGA image with rfnoc_image_builder an error occurs:
>>>>>>>
>>>>>>> >> *rfnoc_image_builder -y block_x440_rfnoc_image_core.yml -d x440
>>>>>>> -t X4_400 --fpga-dir ~/rfnoc/uhd/fpga/*
>>>>>>> *[WAR] Module jsonschema is not installed. Configuration files will
>>>>>>> not be validated against their schema.*
>>>>>>> *[WAR] Skip schema validation (missing module jsonschema).*
>>>>>>> *[INF] Using FPGA directory /home/satmotion/rfnoc/uhd/fpga*
>>>>>>> *[INF] Selected device x440*
>>>>>>> *[INF] Using io_signatures.yml from /usr/local/share/uhd/rfnoc/core.*
>>>>>>> *Traceback (most recent call last):*
>>>>>>> * File "/usr/local/bin/rfnoc_image_builder", line 240, in <module>*
>>>>>>> * sys.exit(main())*
>>>>>>> * File "/usr/local/bin/rfnoc_image_builder", line 219, in main*
>>>>>>> * image_builder.build_image(*
>>>>>>> * File
>>>>>>> "/usr/local/lib/python3.8/site-packages/uhd/imgbuilder/image_builder.py",
>>>>>>> line 1112, in build_image*
>>>>>>> * signatures_conf = io_signatures(core_config_path)*
>>>>>>> * File
>>>>>>> "/usr/local/lib/python3.8/site-packages/uhd/imgbuilder/image_builder.py",
>>>>>>> line 666, in io_signatures*
>>>>>>> * return load_config(os.path.join(config_path,
>>>>>>> "io_signatures.yml"))*
>>>>>>> * File
>>>>>>> "/usr/local/lib/python3.8/site-packages/uhd/imgbuilder/image_builder.py",
>>>>>>> line 640, in load_config*
>>>>>>> * config = ordered_load(stream)*
>>>>>>> * File
>>>>>>> "/usr/local/lib/python3.8/site-packages/uhd/imgbuilder/image_builder.py",
>>>>>>> line 115, in ordered_load*
>>>>>>> * return yaml.load(stream, OrderedLoader)*
>>>>>>> * File
>>>>>>> "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line
>>>>>>> 1085, in
>>>>>>> load*
>>>>>>> * error_deprecation('load', 'load', arg=_error_dep_arg,
>>>>>>> comment=_error_dep_comment)*
>>>>>>> * File
>>>>>>> "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line
>>>>>>> 1037, in
>>>>>>> error_deprecation*
>>>>>>> * raise AttributeError(s)*
>>>>>>> *AttributeError: *
>>>>>>> *"load()" has been removed, use*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> * yaml = YAML(typ='rt') yaml.load(...)and register any classes
>>>>>>> that you use, or check the tag attribute on the loaded data,instead of
>>>>>>> file
>>>>>>> "/usr/local/lib/python3.8/site-packages/uhd/imgbuilder/image_builder.py",
>>>>>>> line 115 return yaml.load(stream, OrderedLoader)*
>>>>>>>
>>>>>>> Do you know how I can solve this problem?
>>>>>>>
>>>>>>> Kind, Regards,
>>>>>>>
>>>>>>> Maria
>>>>>>> _______________________________________________
>>>>>>> USRP-users mailing list -- usrp-users@lists.ettus.com
>>>>>>> To unsubscribe send an email to usrp-users-le...@lists.ettus.com
>>>>>>>
>>>>>>
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
