Hi Emanuel, I'm in the process of building a similar workstation for work with an X440. I don't have any firm recommendations, but I am interested to hear from others on the forum. My understanding is that with full-rate streaming, existing workstations are not going to be able to do much more than write samples to storage. If you need any processing applied to those samples, you probably need to build a custom RFNoC block for the FPGA.
I'm also targeting the Threadripper series hosted on a Asus Pro WS WRX90E-SAGE SE. As for SSDs, I'm planning to use mdadm to apply RAID 0 to four gen 5 NVMe drives. Thanks, Ryan On Wed, Feb 25, 2026 at 3:53 AM Emanuel.Staudinger--- via USRP-users < [email protected]> wrote: > Hi everybody, > > > > we foresee a X440 for our research and are looking for hints on suitable > PC hardware/architectures for high-rate streaming and storage of I/Q > samples, as well as online-processing. > > 100Gbit-NICs can be found in the knowledge base, yet I would be more be > interested in suitable CPUs etc. > > Given the high bandwidth we have a Ryzen Threadripper based system in mind. > > > > Does anyone have experience with Xeon oder Epyc based systems in this > regards? > > Do you have recommendations for suitable SSDs for raw data storage (not > necessarily consumer grade, can also be SSDs built for servers)? > > > > Any insight is highly appreciated. > > Kind regards, > > Emanuel > > —————————————————————————— > > *Deutsches Zentrum für Luft- und Raumfahrt* e.V. (DLR) > > Institut für Kommunikation und Navigation | Communication Systems | > Oberpfaffenhofen, Münchener Str. 20 | 82234 Weßling > > > > Dr.-Ing. *Emanuel Staudinger* > > Telefon +49-8153-28-2887 | Telefax +49-8153-28-1871 > > DLR.de <http://www.dlr.de/> > > > > DLR is represented by the Executive Board and employees authorised by it. > Head of DLR's legal department, Linder Hoehe, 51147 Cologne, can provide > information (DLR.de/imprint). > > > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
