Hello, I have two questions.
1. I would like to ask whether it is expected that the dram folder is not included under the following RFNoC include path after installing the UHD 4.10 release version: C:\\Program Files\\UHD\\include\\uhd\\rfnoc\\dram However, I can see the dram folder in the UHD 4.10 source code, so I copied it from the source code into the installed UHD include folder. Is it okay to use it this way? 2. I am using an X410 with the UC_200 FPGA image, connected to a Windows host PC. The UHD version on the X410 is shown below:\ \[INFO\] \[UHD\] linux; GNU C++ version 11.5.0; Boost_107800; UHD_4.10.0.0-0-g2af4ddb9 After applying the workaround described in question 1, I used the upload function in dram_helper.hpp to upload a recorded file from the host PC to DRAM in order to improve the transfer speed. After running the program, I encountered the following error message: \[18:35:52\] \[ERROR\] \[XPORT::TX_DATA_XPORT\] Requested 'stop on sequence error' stream mode but FPGA does not report that this mode is enabled. Please check whether the FPGA image supports this mode. \[18:35:53\] ERROR: RuntimeError: Requested 'stop on sequence error' stream mode but FPGA does not report that this mode is enabled. Please check whether the FPGA image supports this mode. Do I need to modify the FPGA image to resolve this issue? Or is there another way to fix it? Thank you. Best regards, Eunsung
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
