Jim McCormick wrote:
> Can anyone tell me what size security Torx bit I need to remove the carb
> diaphragm covers?
This was in the FAQ's at the web site.......
How do I remove the tamper proof screw on the carb covers?
TC wrote:
The carburetor screw with the pin in the middle requires a T25 , (tamper
resistant) torx bit ... These
aren't that hard to come by ... (even JC Whitney has a 7 bit set that includes
this size for about $3.50),
and seem to be available just about anywhere you can buy tools. The carb screws
are 5 x 12mm if you
are thinking about replacing them.
--
===================================================
Paul Sayegh
V-Max Technical List Administrator
VMOA Northwest Director
V-Max web page http://www.sayegh.org/tips.htm
===================================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
