Sounds almost like you're describing the 2 water jacket connectors (between
cyls). They are bakelite & about 4 inches long w/2 O rings on them. If
you're building the motor back up you definitely need new ones but ONLY 2 of
them.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 08, 2000 10:35 AM
To: V-MAX TECH LIST
Subject: Cylinder Plugs
My wonderful shop ordered me two head gaskets and 16 rubber
plugs (item #29).
I needed 16 round seals (#28). Should I bother swapping
them out? Are
these needed to be replaced? They look like rubber bolts
with 2 rings on the
shaft. About 1 inch long. I can't tell what they do from
the microfiche.
Thanks for the tip on removing the hex bolts. I don't
have 3/8" drive
hex bolt sockets either and I know the metric's are hard to
find & expensive,
so this little deal is a pain in my side.
Howie
'93 Max
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
