No ... you can blast in the primary at the top of the carb or into the
mixture screw hole, (with the screws out of course). They are all on
the same circuit ... IMHO blasting through the mixture screw holes is
probably the most effective ... and if it isn't it is for sure the
cleanest .......
campbell
----- Original Message -----
From: "Henry Jackson" <[EMAIL PROTECTED]>
Subject: Re: carb problem
> snip <
> I didn't remember anyone saying you had to remove
> the diaphrams in order to blow out the pilot jets.
> Is that necessary?
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
