One of the best suggestions I have seen on this list was to "reverse fill" your
hydraulic system. I would estimate that this reduces time by 75%
Here is the original post.....Thanks Bob
A little trick can save you hours. You can prefill the lines by working
>backwards. Start at the bleeders on the calipers or the clutch either one.
>Get a Plews piston can oiler (about 3 bucks at any discount auto store) and
>a piece of clear plstic tubing to fit the end of the oiler and bleader
>valves. Fill the oiler with brake fluid and crack the
>bleader just enough to allow you to pump fluid UP into the resevor.
>After you start getting a level in the resevor fill it up and continue to
>bleed the system in the normal manner. Bob H
--
===================================================
Paul Sayegh
V-Max Technical List Administrator
VMOA Northwest Director
V-Max web page http://www.sayegh.org/tips.htm
===================================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
