One more time. Disconnect the three wire connector from the stator.
Start the bike. Take a volt/ohm meter and put it on AC volts, reading at
least 50. Now take the connectors and place them in two of the leads and
rev the bike to 3,000. You should get at least 50 volts. Swap one of the
leads with another connector and repeat. If you don't get 50 on both
legs then the stator is bad. Follow the directions in the manual for
checking the rectifier/regulator.
Don "Old Man" Smith
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
