SThomp103,
The manual says that at "sea level", (not where Phil lives .. as
elevation makes a difference), "standard" would be 142 psi, "minimum"
128 psi, and "maximum" 171 psi. It also mentions that differences
between cylinders should not exceed 14 psi, (IMHO .. this is excessive
.. and if you see more than half of that it would be worth
investigating).
As a example .. my '93 .. when it lived in Denver .... averaged low
150s ... and in Phoenix is averages high 160s .. (one cylinder even
hit 171). These readings were all taken "hot" .... don't forget to
hold the throttle "wide open" when taking measurements.
campbell
----- Original Message -----
From: <[EMAIL PROTECTED]>
Subject: Compression check
> Can someone tell me what the compression
> per cylinder shoud be?
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
